Pressure Test Pump PriceHow much? What are the characteristics of high-pressure pressure test pumps? The characteristics of high-pressure pressure test pumps are as follows:

How much is the price of the pressure test pump?

　　1. High-pressure pressure test pumps use water or oil as the testing medium, capable of conducting water pressure tests at different pressure levels from 35 MPa  to 280 MPa.

　　2. The entire testing process of the high-pressure pressure test pump is actively controlled by a computer, and all experimental settings and operations can be completed on the active control console. All valves can be remotely and manually controlled independently, achieving an unmanned site for comprehensive pressure testing.

　　3. The computer actively generates pressure and time curves, displays them in real-time, stores various data, and can print inspection reports in both Chinese and English at any time.

     How much is the price of the pressure test pump?

　　4. Comprehensive monitoring of the test object, compressing and saving the entire process video data.

　　5. The computer actively releases pressure and has manual pressure release devices, making it safer and more reliable.

　　6. The complete equipment of the high-pressure pressure test pump has mature technology, and many domestic companies have safely used it for many years.

　　7. The core components of the equipment, such as the gas booster pump, high-pressure valves, and pipelines, are all imported from the United States, ensuring safety and reliability.

　　8. The electrical control part of the high-pressure pressure test pump follows the electrical industry standards, using well-known brand industrial control computers and data acquisition cards, with stable control functions and reliable data.

　　How much is the price of the pressure test pump? The high-pressure pressure test pump is a product used for various pressure vessels, pipelines, valves, boilers, and other mechanical instruments. How much is the price of the pressure test pump? It is widely used in industrial and construction sites, workshops, and laboratories for water pressure or oil pressure sealing tests, strength tests, and explosion tests. The operation should be carried out as follows:

　　1. Strictly conduct pressure tests according to the testing requirements. The pressure test specimen should be clean, tidy, and easy to inspect.

　　2. Before the pressure test, check the power system and grounding conditions, and check whether the pressure gauge and pressure test pump are working well and unobstructed. The pressure gauge should be large, not less than 1.5 times the test pressure.

　　3. During the preparation for the pressure test, arrange the positions of the inlet and outlet. When filling water during the pressure test, first open the vent hole and remove the pressure gauge to allow the air in the container to escape. When water reaches the vent and pressure gauge, install the pressure gauge and close the vent.

　　4. Pressure should be increased slowly, and overpressure is not allowed. Once the pressure test specimen reaches a certain pressure, hammering will stop. If any defects are found in the specimen and pipeline, the pressure should be reduced to zero before handling. Operations under pressure are not allowed.

　　5. For negative pressure and low-pressure specimens, small containers can be pressurized to a certain pressure for pressure holding checks. Larger specimens can be gradually increased for inspection. The pressure test pump should be operated by a designated person, and more than two people are required for each pressure test. Before releasing water, there should be a designated person to command and stay at their post.

　　6. The pressure test specimen must be placed steadily, and the pressure test part must not leak after inspection.

　　7.How much is the price of the pressure test pump?After the pressure test, drain the water and release the pressure before disassembling the bolts. After the pressure test in winter, water must be drained immediately to prevent freezing damage to the equipment. During the preparation for the pressure test, the positions of the inlet and outlet should be arranged. When the pressure test is filled with water, open the vent hole, remove the pressure gauge, and ensure the air in the container is clean. When water flows out from the vent and pressure gauge, install the pressure gauge and close the vent.

　　8. Tighten the bolts to ensure even force and prevent local deformation and cracking. Before the pressure test, check the power system and grounding conditions, and check whether the pressure gauge and pressure test pump are operating well and unobstructed. The pressure gauge should be no less than 1.5 times the test pressure.

　　9. The pressure test pump should be operated by a designated person. Each pressure test requires more than two people, and there should be a designated person to command before releasing water, ensuring they stay at their post.

10. Mark the defect areas observed and fill out the pressure test record.